Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
10nm In Trouble
#18
https://www.techpowerup.com/276090/intel...hanna-call
Quote:Improved yields on 10 nm are being reported due to deployment of Intel's SuperFin technology, which improved yields to upwards of 50%, but still keeps them under the ones achieved in Intel's 14 nm process; an eye-opening tidbit in that Cannon Lake on 10 nm originally saw yields of only 25% usable chips per wafer; and that backporting Rocket Lake meant Intel had to deal with unfathomably large chips and high power consumption characteristics. And to add insult to injury, there is still not a definite timetable for 7 nm deployment, with delays being expected to be worse than the previously reported 6-12 months. This all paints a somewhat grim picture for Intel's capacity to compete with TSMC-powered AMD in many of its most important markets; the blue giant won't topple, of course, but it's expected that five years from now, we'll be looking at a very different outlook in the market between AMD and Intel. You can check the talked-about points in the call via the transcript after the break. You should still take the transcript with a grain of salt.
Reply


Messages In This Thread
10nm In Trouble - by SteelCrysis - 04-27-2018, 08:39 PM
RE: 10nm In Trouble - by SteelCrysis - 05-02-2018, 02:10 AM
RE: 10nm In Trouble - by SteelCrysis - 05-15-2018, 08:53 PM
RE: 10nm In Trouble - by SteelCrysis - 05-17-2018, 09:28 PM
RE: 10nm In Trouble - by SteelCrysis - 05-22-2018, 08:30 PM
RE: 10nm In Trouble - by SteelCrysis - 06-30-2018, 02:57 AM
RE: 10nm In Trouble - by SteelCrysis - 07-27-2018, 09:56 PM
RE: 10nm In Trouble - by SteelCrysis - 10-18-2018, 01:57 AM
RE: 10nm In Trouble - by SteelCrysis - 10-25-2018, 08:35 PM
RE: 10nm In Trouble - by SteelCrysis - 11-30-2018, 05:48 AM
RE: 10nm In Trouble - by SteelCrysis - 12-10-2018, 11:19 PM
RE: 10nm In Trouble - by SteelCrysis - 07-18-2019, 07:57 AM
RE: 10nm In Trouble - by SteelCrysis - 07-18-2019, 09:04 PM
RE: 10nm In Trouble - by SteelCrysis - 10-16-2019, 09:17 AM
RE: 10nm In Trouble - by SteelCrysis - 10-29-2019, 03:57 AM
RE: 10nm In Trouble - by SteelCrysis - 11-07-2019, 02:02 AM
RE: 10nm In Trouble - by SteelCrysis - 10-07-2020, 07:15 AM
RE: 10nm In Trouble - by SteelCrysis - 12-18-2020, 08:31 AM
RE: 10nm In Trouble - by SteelCrysis - 12-25-2020, 07:43 AM
RE: 10nm In Trouble - by SteelCrysis - 12-30-2020, 08:55 AM
RE: 10nm In Trouble - by SteelCrysis - 12-31-2020, 08:32 AM
RE: 10nm In Trouble - by SteelCrysis - 01-13-2021, 08:20 AM

Forum Jump:


Users browsing this thread: 1 Guest(s)