Big GPU-Shootout; Part III, PCIe 1.0 vs. PCIe 2.0
Fur Benchmark
Fur Benchmark v1.2 is Open Gl and a synthetic benchmark. We picked 1920×1200 resolution and 4xMSAA.
a rotating fur donut bench
Fur OpenGL benchmark
Here our 280GTX takes off, unfettered by the P35 motherboard’s limited PCIe bandwidth. 4870X2 and 4870-X3 have a solid but perhaps less dramatic improvement while 4870-512MB makes no difference in either motherboard. We also note the 512MB version is outperformed by the 4870-1GB version in this test. Enough of the synthetics – on to PC games!
Curious, why’d you set Catalyst A.I. to “Advanced”?
How about a few links to explanations of Catalyst AI and what “advanced” really does? Here is an old article on it:
http://www.hardocp.com/article.html?art=NjY2LDI=
Here is the tweak guide which supports my own research:
http://www.tweakguides.com/ATICAT_7.html
“Catalyst A.I. allows users to determine the level of ‘optimizations’ the drivers enable in graphics applications. These optimizations are graphics ‘short cuts’ which the Catalyst A.I. calculates to attempt to improve the performance of 3D games without any noticeable reduction in image quality. In the past there has been a great deal of controversy about ‘hidden optimizations’, where both Nvidia and ATI were accused of cutting corners, reducing image quality in subtle ways by reducing image precision for example, simply to get higher scores in synthetic benchmarks like 3DMark. In response to this, both ATI and Nvidia have made the process transparent to a great extent. You can select whether you want to enable or disable Catalyst A.I. for a further potential performance boost in return for possibly a slight reduction in image quality in some cases. If Catalyst AI is enabled, you can also choose the aggressiveness of such optimizations, either Standard or Advanced on the slider. The Advanced setting ensures maximum performance, and usually results in no problems or any noticeable image quality reduction. If on the other hand you want to always ensure the highest possible image quality at all costs, disable Catalyst A.I. (tick the ‘Disable Catalyst A.I.’ box). I recommend leaving Catalyst A.I enabled unless you experience problems. ATI have made it clear that many application-specific optimizations for recent games such as Oblivion are dependent on Catalyst AI being enabled.
Note: As of the 6.7 Catalysts, Crossfire users should set Catalyst A.I. to Advanced to force Alternate Frame Rendering (AFR) mode in all Direct3D games for optimal performance. Once again, Catalyst A.I. should only be disabled for troubleshooting purposes, such as if you notice image corruption in particular games”
In other words, one can choose the aggressiveness of your optimizations, either “Standard” or “Advanced”. The Advanced setting ensures maximum performance – as for benchmarking games – and with no noticeable image quality reduction. However, if you are doing IQ comparisons as BFG10K did, and want to guarantee the very highest image quality, then disable Catalyst A.I. [but not for crossfire; set it to “Standard”]. I have always recommended leaving Catalyst A.I enabled unless you experience any glitches in games.
You have to realize that Cat AI is not necessarily supposed to give you a boost in every single game. It tries to do optimizations, if possible, but many times these are either not possible with a particular game, or the settings you’ve chosen in the game may be too low for it to make any noticeable impact.
That is why I recommend leaving it on “Advanced”; you get a possisble performance boost; if not then you lose nothing. Or you can set it to standard or off if you feel your image quality is being degraded.
Hope that explains it.
Very interesting, I’ll definitely be I check your site on a regular basis now.